Difference between revisions of "COVID"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
There will soon be a vacant/occupied sign outside each microscope rooms. Please use them in addition to the calendar. | There will soon be a vacant/occupied sign outside each microscope rooms. Please use them in addition to the calendar. | ||
| − | + | == Scheduling == | |
Microscopes are only to be scheduled for half a day or for a full day. The start of a microscope session should start on the hour, and end half-past an hour. For example, start at 9am, and end at 11:30am. This allows at least a 30 minute gap between users for proper air exchange to occur in the room. | Microscopes are only to be scheduled for half a day or for a full day. The start of a microscope session should start on the hour, and end half-past an hour. For example, start at 9am, and end at 11:30am. This allows at least a 30 minute gap between users for proper air exchange to occur in the room. | ||
| Line 10: | Line 10: | ||
{{Note|Scheduling discipline must be adhered to for everyone's safety.}} | {{Note|Scheduling discipline must be adhered to for everyone's safety.}} | ||
| − | + | == Cleaning == | |
The following will need to be done '''before''' starting your imaging session, and '''after''' you have finished. | The following will need to be done '''before''' starting your imaging session, and '''after''' you have finished. | ||
{{Warning|Assume the microscope and computers were not properly cleaned previously}} | {{Warning|Assume the microscope and computers were not properly cleaned previously}} | ||
| − | {{Warning|Use only 70% Ethanol, applied to a napkin or | + | {{Warning|Use only 70% Ethanol, applied to a napkin or Kimwipe, except for objectives which require lens paper. Do not spray directly on the microscope or electronics}} |
{{Warning|You should wear a fresh pair of gloves inside microscope room. Please dispose of them once you are outside of the microscope, and after the door has been shut}} | {{Warning|You should wear a fresh pair of gloves inside microscope room. Please dispose of them once you are outside of the microscope, and after the door has been shut}} | ||
| − | + | === Power Switches === | |
| − | Assume all power switches and other high contact surfaces are contaminated. You may elect to use gloves and/or wipe them down. If you don't use gloves, please | + | Assume all power switches and other high contact surfaces are contaminated. You may elect to use gloves and/or wipe them down. If you don't use gloves, please sanitize your hands immediately before and after touching any power switches. Keys to turn lasers on maybe difficult to clean but should be done. {{Note|Keys for lasers do not have to be turned off (and cleaned) after you have finished.}} |
| − | + | === Computers === | |
* Wipe the power button. | * Wipe the power button. | ||
* Wipe the tops of the keys of the keyboard. | * Wipe the tops of the keys of the keyboard. | ||
* Wipe the top and sides of the mouse. | * Wipe the top and sides of the mouse. | ||
* Wipe down the desk area around the keyboard and mouse. | * Wipe down the desk area around the keyboard and mouse. | ||
| − | + | === Microscopes === | |
* Wipe the cap and sides of the oil bottle. | * Wipe the cap and sides of the oil bottle. | ||
* Wipe the left and right fine/coarse focus control knobs. | * Wipe the left and right fine/coarse focus control knobs. | ||
Revision as of 20:59, 1 June 2020
COVID INFORMATION
Note
Please make sure you have read the following: COVID-19 Guidelines for Laboratory Personnel
There will soon be a vacant/occupied sign outside each microscope rooms. Please use them in addition to the calendar.
Scheduling
Microscopes are only to be scheduled for half a day or for a full day. The start of a microscope session should start on the hour, and end half-past an hour. For example, start at 9am, and end at 11:30am. This allows at least a 30 minute gap between users for proper air exchange to occur in the room.
Note
Scheduling discipline must be adhered to for everyone's safety.
Cleaning
The following will need to be done before starting your imaging session, and after you have finished.
Warning
Assume the microscope and computers were not properly cleaned previously
Warning
Use only 70% Ethanol, applied to a napkin or Kimwipe, except for objectives which require lens paper. Do not spray directly on the microscope or electronics
Warning
You should wear a fresh pair of gloves inside microscope room. Please dispose of them once you are outside of the microscope, and after the door has been shut
Power Switches
Assume all power switches and other high contact surfaces are contaminated. You may elect to use gloves and/or wipe them down. If you don't use gloves, please sanitize your hands immediately before and after touching any power switches. Keys to turn lasers on maybe difficult to clean but should be done.
Note
Keys for lasers do not have to be turned off (and cleaned) after you have finished.
Computers
- Wipe the power button.
- Wipe the tops of the keys of the keyboard.
- Wipe the top and sides of the mouse.
- Wipe down the desk area around the keyboard and mouse.
Microscopes
- Wipe the cap and sides of the oil bottle.
- Wipe the left and right fine/coarse focus control knobs.
- Wipe the stage surface, especially focusing on the areas you manipulate to insert a slide.
- Wipe down the front body of the microscope, where your exhaled air would likely land.
- Wipe down any optical table surface that you might place arms or hands.
- If equipped, wipe the remote focus control knob.
- If equipped, wipe down any control pads and/or stage control joysticks.
- Confirm that the ocular rubber eyecups are not in place. They should not be used.
Note
The above cleaning process should be done before and after using a shared microscope or shared computer.
If there are any questions or suggestions, you can contact Karl Bellve.